Worksheet generator

1.C — 30KA-0006Number lines and betweenness

• AI counted the tick marks and gave the position number instead of reading the value on the scale.
• BI worked out that each gap is worth 10 but then counted only as far as the tick before the arrow.
• DI counted the tick marks rather than the gaps between them, so every gap came out one step too small.
• EI counted the gaps from the right-hand end instead of from zero.

2.B — 3 centsKA-0010Money and change

• AI found the smallest amount that cannot be made rather than the largest one.
• CI did not notice that 7 is 2 plus 5, so I marked it as impossible without testing it.
• DI only tried using coins of one kind at a time and never mixed the two denominations.
• EI assumed odd amounts are impossible because one of the coins is even.

3.C — 16KA-0050Working backwards

• AI added the 4 and the 6 and stopped, forgetting to undo the halving.
• BI doubled the 6 first and then added the 4, reversing the steps in the wrong order.
• DI doubled the total at the end rather than doubling only the amount left after the first spend.
• EI doubled twice because spending half felt like it needed undoing more than once.

4.C — 14KA-0051Complementary counting

• AI counted the multiples of 3 and gave that instead of the numbers that are not multiples.
• BI counted 21 as a multiple of 3 inside the range, so I removed one too many.
• DI removed only the multiples of 3 that are also even, so I subtracted three instead of six.
• EI gave the size of the whole range and forgot to remove anything at all.

5.C — 5KA-0061Operation puzzles and cryptarithms

• AI solved for the triangle and gave that instead of the square.
• BI found the triangle is 4 and gave that number, without going on to the second equation.
• DI halved the 12 instead of dividing it by the three triangles.
• EI subtracted the wrong way round, taking 9 from a number instead of taking the triangle from 9.

6.A — blackKA-0108Repeating cycles and position mod n

• BI got a remainder of 1 but read the last colour of the repeat rather than the first.
• CI thought the pattern had no fixed first tile, even though tile one is given.
• DI assumed a repeating pattern must eventually change.
• EI assumed the pattern runs only for as many tiles as one repeat contains.

7.B — Write an answer for every one of themKA-0127Never leave a blank — there is no penalty

• AI treated guessing as dishonest, but the rules of the paper explicitly allow it and cost nothing.
• CI answered one and left two blanks that could each have scored, at no risk.
• DI tried to communicate with the marker, but only the answers are scored.
• EI offered working on a paper where only the chosen letter is marked.

8.B — 2KA-0016Dice and cube face relationships

• AI used the upper die's touching face instead of the lower one, so I worked from 3 rather than 5.
• CI gave the number on a touching face itself rather than the number opposite it.
• DI subtracted 3 from 7 because I confused which die was sitting on which.
• EI gave the lower die's upward face, which is the number I was told, not the hidden one underneath.

9.D — 144KA-0063Divisibility rules: 2, 3, 4, 5, 9, 10

• AI checked that it divides by 4 and stopped without testing the 9.
• BI checked the digit sum for 9 and stopped without testing the 4.
• CI saw an even number with a digit sum of 6 and treated 6 as good enough for 9.
• EI tested 9 with the digit sum and assumed any odd multiple of 9 also divides by 4.

10.B — 3KA-0068Tree diagrams

• AI read the two in exactly two heads as the answer rather than as a condition to count.
• CI counted the outcomes with two or more heads, so I included the three-head one as well.
• DI counted the orderings of three different objects instead of listing the eight outcomes.
• EI gave the total number of possible outcomes rather than the number with exactly two heads.

11.C — 6KA-0081Views of a solid: top, front, side

• AI used the view from above only, giving one cube per square, and ignored the height the front view demands.
• BI made just one column two cubes tall, forgetting that the front view is two cubes high across its whole width.
• DI added an extra cube that neither view requires.
• EI assumed the solid is a filled 2 by 2 by 2 block, which is the largest that fits rather than the smallest.

12.D — 6KA-0085Line and rotational symmetry

• AI checked only the vertical and horizontal folds and stopped there.
• BI counted the lines through opposite corners and forgot the ones through opposite edges.
• CI assumed a hexagon behaves like a rectangle with a couple of extra folds.
• EI counted each line twice, once from each end.

13.B — 1KA-0089Building and counting with unit cubes

• AI assumed every small cube touches the outside somewhere.
• CI counted the cubes at the centre of each face, which are painted on one side.
• DI counted the corner cubes, which are the most painted rather than the least.
• EI gave the total number of small cubes instead of the unpainted ones.

14.C — CalKA-0091Elimination grids

• AI used Bo's clue and forgot the very first clue, which rules Ana out directly.
• BI read Bo's clue as telling me what Bo has rather than what Bo does not have.
• DI stopped after using each clue once, without going back to see what the ticks had ruled out.
• EI applied Bo's clue but never came back to Ana's, so I left two people in the running.

15.B — Box X is not redKA-0099Reading a logical statement precisely

• AI read the rule backwards, as if being heavy were what makes a box red.
• CI assumed not red must mean one particular other colour, when the rule says nothing about which.
• DI contradicted the rule I was given rather than applying it to box X.
• EI decided one fact could not settle anything, without testing what would follow if X were red.

16.C — 12KA-0105Patterns in tables and grids

• AI stopped at row 3, taking two steps down from the top instead of three.
• BI found where row 4 starts but forgot to move across to the third column.
• DI moved three columns across instead of two, counting columns rather than steps between them.
• EI took four steps of 3 downwards instead of three, counting rows rather than the gaps between them.

17.C — 4KA-0020Paper folding and hole punching

• AI forgot that the punch goes through every layer at once, not just the top one.
• BI undid only one of the two folds before counting the holes.
• DI doubled for the first fold and then added two more rather than doubling a second time.
• EI counted a fold that was never made, doubling three times instead of twice.

18.D — 8KA-0134Paper folding and hole punching

• AI forgot that the punch goes through every layer, not just the top one.
• BI undid only one of the two folds before counting.
• CI doubled twice for the folds but added the second hole instead of doubling for it too.
• EI counted three folds instead of two, doubling one time too many.

19.D — 49KA-0138Growth patterns and figurate numbers

• AI continued the pattern to the fifth square instead of the seventh.
• BI stopped one square short, giving the sixth instead of the seventh.
• CI added 6 to the sixth square's 36, treating the differences as constant.
• EI continued one square too far and gave the eighth.

20.C — 4KA-0140The multiplication principle

• AI counted the codes that do start with A rather than the ones that do not.
• BI counted the letters available for the first position instead of counting whole codes.
• DI counted every arrangement of the three letters and forgot the restriction.
• EI allowed letters to repeat, which the words each exactly once rule out.